|
Aviation
Lubricants
|
 |
AeroShell
Fluid 31
AeroShell®
Fluid 31 is a synthetic hydrocarbon hydrolic
fluid with greatly improved fire resistance
characteristics when compared with conventional
petroleum products. |
|
|
 |
AeroShell®
Fluid 4
AeroShell
Fluid 4 is a mineral based hydraulic oil with
excellent low temperature characteristics that
is capable of operating over a wide range of
temperatures. AeroShell Fluid 4 is oxidation
inhibited, and it contains a special antiwear
additive. It is dyed red for easy identification
and leak detection purposes. It meets the now
obsolete military specification MIL-H-5606A. |
|
|
 |
AeroShell®
Fluid 41
AeroShell
Fluid 41 is a mineral based aircraft hydraulic
oil, with excellent low temperature
characteristics, that is capable of operating
over a wide range of temperatures. AeroShell
Fluid 41 is oxidation inhibited, and contains a
special antiwear additive. It is dyed red for
easy identification and leak detection purposes.
It meets military specification MIL-H-5606G.
AeroShell Fluid 41 meets superclean
requirements. |
|
|
 |
AeroShell®
Oil W 100 Plus
A
new single grade oil that combines proven
Aeroshell ashless dispersant technology with
advanced antiwear additives. It's the oil for
pilots who want a single grade that delivers
extra protection and performance. Aeroshell Oil
W 100 Plus brings together the best qualities of
two of the country's best-selling four-cycle
aviation oils. |
|
|
 |
AeroShell®
Oil W 100 Single Grade Oil
AeroShell®
Oil W single grades are premium quality ashless
dispersant lubricating oils for 4-cycle aircraft
piston engines. Proven to promote engine
cleanliness, these single grades include
carefully selected additives that leave no
metallic ash in combustion chambers. Available
in grades 65 (SAE 30), 80 (SAE 40), 100 (SAE 50)
and 120 (SAE 60). |
|
|
 |
AeroShell®
Oil W 15W-50 Multigrade
Multiviscosity
technology is the new standard in aviation
piston engines. The extremely versatile
AEROSHELL Oil W 15W-50, with its unique blend of
high quality mineral oil and 50% synthetic base
stocks, helps your engine operate efficiently
under the toughest conditions. Complete with the
AeroShell® Oil W anticorrosion additive system,
this oil is formulated to deliver easier
startups, improved lubrication and cleaner
operation for certified 4-stroke aircraft piston
engines. |
|
|
 |
Aeroshell®
Oils
AeroShell®
Oils are primarily recommended for break-in of
most new and rebuilt 4-cycle aircraft piston
engines, AeroShell single grade oils are perfect
for continuous use when an ashless dispersant
oil is not required. AeroShell® oils are
available in three grades: 65 (SAE 30), 80 (SAE
40), 100 (SAE 50). |
|
Greases
|
|
 |
AeroShell®
Grease 14
AeroShell
Grease 14 is the leading helicopter multipurpose
grease with a calcium soap thickener. AeroShell
Grease 14 is especially formulated to reduce
fretting, a common problem in helicopter hub
assemblies. |
|
|
 |
AeroShell®
Grease 16
AeroShell
Grease 16 is a superior anti-friction bearing
grease recommended for anti-friction bearings
operting under load at high speeds and high or
low temperatures. |
|
|
 |
AeroShell®
Grease 17
AeroShell
Grease 17 is extremely pressure multipurpose
grease recommended for heavily loaded sliding
steel surfaces where protection against seizure
and corrosion is desired; e.g. bogie pivot pins
on jet aircraft landing gear assemblies. |
|
|
 |
AeroShell®
Grease 22
AeroShell
Grease 22 is versatile multipurpose grease
recommended for aircraft wheel bearings, engine
accessories and airframe lubrication, and for
general anti-friction bearings operating at high
speeds and at high or low temperatures. |
|
|
 |
AeroShell®
Grease 33
AeroShell
Grease 33 is multipurpose airframe grease
specifically developed for Boeing to be used in
roller bearings, actuator screws, and other
airframe equipment. |
|
|
 |
AeroShell®
Grease 5
AEROSHELL
Grease 5 is the proper choice (where specified)
for wheel bearings and engine accessories
operating at high speeds and relatively high
temperatures. |
|
|
 |
AeroShell®
Grease 6
AEROSHELL
Grease 6 is a general purpose airframe grease
for use in plain and antifriction bearings and
gearboxes (where specified). It provides
excellent water resistance and has low noise
capabilities. |
|
|
 |
AeroShell®
Grease 7
AeroShell
Grease 7 is a low temperature multipurpose
aviation grease recommended for instruments and
general airframe lubrication of turbine powered
aircraft as well as highly loaded gears and
actuator screw mechanisms. |
|
Turbine
|
|
 |
AeroShell®
Turbine Oil 500
5
centistoke synthetic lubricating oil for gas
turbine engines. |
|
|
 |
AeroShell®
Turbine Oil 555
5
centistoke synthetic lubricating oil for gas
turbine engines and helicopter transmissions. |
|
|
 |
AeroShell®
Turbine Oil 560
A
new third generation "low coking" 5
centistoke synthetic lubricating oil designed
specifically for gas turbine engines. |
|
|
SHELL Aviation Lubricants
